先进制造业知识服务平台
国家科技图书文献中心机械分馆　　工信部产业技术基础公共服务平台　　国家中小企业公共服务示范平台

Joint Strength Analysis of Single Lap Joint in Glass Fiber Composite Material
参考中译:玻璃纤维复合材料单搭接接头强度分析


          

刊名：International journal of advanced mechanical engineering
作者：Maha Abdelhaq
刊号：780HA006
ISSN：2250-3234
出版年：2022
年卷期：2022, vol.12, no.1
页码：9-19
总页数：11
分类号：TH
关键词：Joint strength；GFRP；Composite material；Adhesive joint；Riveted joint；Bolted joint；Single lap joint
参考中译：接头强度；玻璃钢；复合材料；胶接接头；铆接接头；螺栓接头；单搭接接头
语种：eng
文摘：Composite materials are highly used in several different fields like aerospace structure, marine, automobile, etc. Due to high strength they are widely used in the low weight applications and also as an alternate for metals to reduce the material cost. There are various types of methods used for joining the composite materials. The single lap joint is prepared by three joining methods Adhesive bonding, Riveted and bolted joints. The experimental study was carried out to identify the ultimate strength and mode of failure in single lap glass fiber rein forced polymer (GFRP) joints. In adhesive bonding, the experiment was carried out by varying the three different overlap thickness and three different adhesive bonding lengths. In the same manner the experiment was carried out in riveted joint and bolted joint by varying the number of rivet and bolt. The present study deals with the analysis of single lap joint subjected to tensile test and stress distribution in the joint members under various joining methods.
参考中译：复合材料在航空航天结构、船舶、汽车等领域有着广泛的应用。由于其高强度，被广泛应用于轻量化领域以及作为金属的替代品以降低材料成本。有各种类型的方法用于连接复合材料。单搭接采用胶接、铆接和螺栓连接三种连接方式。为确定玻璃纤维增强聚合物(GFRP)单搭接节点的极限强度和破坏模式，进行了试验研究。在粘接中，通过改变三种不同的重叠厚度和三种不同的粘接长度进行了实验。以同样的方式，通过改变铆钉和螺栓的数量，在铆接和螺栓连接中进行了试验。本文对不同连接方式下的单搭接接头进行了拉伸试验和接头构件的应力分布分析。



国家科技图书文献中心  全球文献资源网  京ICP备05055788号-26  京公网安备11010202008970号  机械工业信息研究院 2018-2024