先进制造业知识服务平台
国家科技图书文献中心机械分馆　　工信部产业技术基础公共服务平台　　国家中小企业公共服务示范平台

Preliminary Crankshaft Speed Assessment for a Reciprocating Hybrid Power Machine with Regenerative Heat Transfer in Compressor and Pump Modes
参考中译:压缩机和泵模式下蓄热式往复式混合动力机械曲轴转速的初步评估


          

刊名：Russian engineering research
作者：Shcherba V. E.（Omsk State Technical University）
刊号：710B0274
ISSN：1068-798X
出版年：2023
年卷期：2023, vol.43, no.5
页码：529-533
总页数：5
分类号：TH16
关键词：reciprocating hybrid power machine；regenerative heat transfer；reciprocating compressor；reciprocating pump；crankshaft speed；injection pressure
参考中译：往复式混合动力机；蓄热式换热；往复式压缩机；往复泵；曲轴转速；喷射压力
语种：eng
文摘：The crankshaft speed in a reciprocating hybrid power machine with regenerative heat transfer operating in pump mode and in compressor mode is considered. By analysis of the injection and suction processes, assuming that the maximum pressure losses in these processes are equal, a formula is derived for the crankshaft speed in pump mode with known crankshaft speed in compressor mode. In addition, the crankshaft speed in pump mode with known crankshaft speed in compressor mode is determined on the assumption that the pressure losses in injection and suction for compressor and pump modes are equal. By numerical analysis with water and air as the working media, the crankshaft speed in pump mode is expressed as a function of the crankshaft speed in compressor mode and the injection pressure. If the crankshaft speed in compressor mode is 2000–3000 rpm, the crankshaft speed in pump mode is found to be 100–150 rpm.
参考中译：考虑了在泵模式和压缩机模式下运行的具有再生热传递的往复式混合动力机器中的曲轴速度。通过对喷射和吸入过程的分析，假设这两个过程中的最大压力损失相等，在已知压缩机模式曲轴转速的情况下，推导出泵模式曲轴转速的计算公式。此外，在压缩机模式中曲轴速度已知的情况下，泵模式中的曲轴速度是在压缩机和泵模式的喷射和吸入中的压力损失相等的假设下确定的。以水和空气为工质，通过数值分析，将泵模式下的曲轴转速表示为压气机模式下的曲轴转速和喷油压力的函数。如果压缩机模式下的曲轴速度为2000-3000 rpm，则发现泵模式下的曲轴速度为100-150 rpm。



国家科技图书文献中心  全球文献资源网  京ICP备05055788号-26  机械工业信息研究院 2018-2024