先进制造业知识服务平台
国家科技图书文献中心机械分馆　　工信部产业技术基础公共服务平台　　国家中小企业公共服务示范平台

期刊


ISSN1091-0344
刊名Machining Science and Technology
参考译名机械加工科学与技术
收藏年代1998～2023



全部

1998 1999 2000 2001 2002 2003
2004 2005 2006 2007 2008 2009
2010 2011 2012 2013 2014 2015
2016 2017 2018 2019 2020 2021
2022 2023

2020, vol.24, no.1/3 2020, vol.24, no.4/6

题名作者出版年年卷期
Correlation between different cutting conditions, surface roughness and dimensional accuracy when ball end micro milling material measures with freeform surfacesKlauer, K.; Eifler, M.; Kirsch, B.; Seewig, J.; Aurich, J. C.20202020, vol.24, no.1/3
Tool wear estimation in machining based on the flank wear inclination angle changes using the FE methodNooraie, Ramin Yousefi; Safari, Mehdi; Pak, Abbas20202020, vol.24, no.1/3
Experimental and numerical investigation of cutting forces in micro-milling of polycarbonate glassJahan, Muhammad Pervej; Ma, Jianfeng; Hanson, Craig; Chen, Xingbang; Arbuckle, Greg K.20202020, vol.24, no.1/3
Investigation into the blade-formation process in electrochemical trepanning of diffusersZhu Dong; Hu Xingyan; Lin Jiahao; Xu Zhengyang; Liu Jia20202020, vol.24, no.1/3
Thermal modeling of drilling process in titanium alloy (Ti-6Al-4V)Kumar, Ankit; Bhardwaj, Rajneesh; Joshi, Suhas S.20202020, vol.24, no.1/3
Quantitative analysis of microstructure refinement in ultrafine-grained strips of Al6063 fabricated using large strain extrusion machiningSharma, Vipin Kumar; Kumar, Vinod; Joshi, Ravinder Singh20202020, vol.24, no.1/3
Experimental investigation and economic analysis of surfactant (Span-20) in powder mixed electrical discharge machining (PMEDM) of AISI D2 hardened steelHosni, Nor Ain Jamil; Lajis, Mohd Amri20202020, vol.24, no.1/3
Tribochemical machining of polycrystalline diamond using ferrous tool materialsXu, Pengzi; Zhou, Xiaoqin; Liu, Qiang20202020, vol.24, no.1/3
Machinability enhancements of ultrasonic-assisted deep drilling of aluminum alloysNgoc-Hung Chu; Van-Du Nguyen; Quoc-Huy Ngo20202020, vol.24, no.1/3
Integration of cutting force control and chatter suppression control into automatic cutting feed adjustment system designLin, Ching-Yang; Yeh, Syh-Shiuh20202020, vol.24, no.1/3
123



国家科技图书文献中心  全球文献资源网  京ICP备05055788号-26  机械工业信息研究院 2018-2024