先进制造业知识服务平台
国家科技图书文献中心机械分馆　　工信部产业技术基础公共服务平台　　国家中小企业公共服务示范平台

期刊


ISSN1738-494X
刊名Journal of Mechanical Science and Technology
参考译名韩国机械工程师学会国际杂志
收藏年代2005～2023

关联期刊参考译名收藏年代
KSME International Journal韩国机械工程师学会国际杂志2001～2005


全部

2005 2006 2007 2008 2009 2010
2011 2012 2013 2014 2015 2016
2017 2018 2019 2020 2021 2022
2023

2013, vol.27, no.1 2013, vol.27, no.10 2013, vol.27, no.11 2013, vol.27, no.12 2013, vol.27, no.2 2013, vol.27, no.3
2013, vol.27, no.4 2013, vol.27, no.5 2013, vol.27, no.6 2013, vol.27, no.7 2013, vol.27, no.8 2013, vol.27, no.9

题名作者出版年年卷期
Thermal conduction of stable graphite suspensions considering structural characteristics of graphite aggregationsJae Sik Jin20132013, vol.27, no.9
Strain effect and phonon transport in strained-silicon-based transistorsJae Sik Jin20132013, vol.27, no.9
A simple model for the prediction of thermal conductivity of Ge_2Sb_2Te_5 thin filmJae Sik Jin20132013, vol.27, no.9
Optimum residence time for steel productivity and energy saving in a hot rolled reheating furnaceDong Eun Lee; Man Young Kim20132013, vol.27, no.9
Combustion and emission characteristics of low rank-coals utilized in KoreaYong-Gyun Kim; Byoung-Hwa Lee; Chung-Hwan Jeon20132013, vol.27, no.9
Influence of gas turbine specification and integration option on the performance of integrated gasification solid oxide fuel cell/gas turbine systems with CO_2 captureJi Ho Ahn; Sung Ku Park; Tong Seop Kim20132013, vol.27, no.9
Application of QFA coupled with CFD analysis to predict the hardness of T6 heat treated Al6061 cylinderDae-Hoon Ko; Dae-Cheol Ko; Hak-Jin Lim; Byung-Min Kim20132013, vol.27, no.9
Multiple-response optimization of turning machining by the taguchi method and the utility concept using uni-directional glass fiber-reinforced plastic composite and carbide (k10) cutting toolSurinder Kumar; Meenu; P. S. Satsangi20132013, vol.27, no.9
Ceramic to metal joining by using 1064 nm pulsed and CW laser energy sourceYoung Min Lee; Soo Won Kim; Joohan Kim; Hae Woon Choi20132013, vol.27, no.9
Prediction of cutting force, tool wear and surface roughness of Al6061/SiC composite for end milling operations using RSMS. Jeyakumar; K. Marimuthu; T. Ramachandran20132013, vol.27, no.9
12345678910...



国家科技图书文献中心  全球文献资源网  京ICP备05055788号-26  机械工业信息研究院 2018-2024