先进制造业知识服务平台
国家科技图书文献中心机械分馆 工信部产业技术基础公共服务平台 国家中小企业公共服务示范平台
主页
外文期刊
OA 期刊
电子期刊
外文会议
中文期刊
标准
网络数据库
专业机构
企业门户
起重机械
生产工程
高级检索
关于我们
版权声明
使用帮助
会议文集
文集名
Advances in Materials and Metallurgy
会议名
2018 International Conference on Engineering Materials, Metallurgy and Manufacturing (ICEMMM 2018)
中译名
《2018年国际工程材料、冶金与制造会议》
会议日期
February 15-16, 2018
会议地点
Chennai, India
出版年
2019
馆藏号
328342
题名
作者
出版年
Sliding Wear Response of Typical Bearing Materials
Ram Naresh; Ankit Aman; Anuj Gupta; S. Sivarajan
2019
Investigating and Enhancing the Properties of Biodegradable Polymer Cassava Starch with Acrylonitrile Butadiene Styrene by the Addition of Cardanol Oil
T. Panneerselvam; T. Prasanna Vengatesh; S. Raghuraman
2019
Investigation on the Microstructure and Mechanical Properties of AA6082/TiO_2 Surface Composites Produced by Friction Stir Processing
Deepak Sandar; Rishika Chatterjee; R. Jayendra Bharathi; Peddavarapu Sreehari
2019
Microstructure Evolution and Mechanical Properties of Al 1050/Al 5083 Laminate Composites Produced by Accumulative Roll Bonding Process
L. Poovazhagan; P. Ruthran; S. Sreyas; A. Thamizharasan; S. Thejas
2019
Synthesis and Characterization of Nano-Glass Particles Reinforced AZ91D Magnesium Alloy Composites
G. Anbuchezhiyan; B. Mohan; T. Muthuramalingam
2019
Microstructure and Abrasive Wear Behavior of Copper-Boron Carbide Nanocomposites
L. Poovazhagan; H. Jeffrey Thomas; M. Selvaraj
2019
On Mechanical and Thermal Properties of Concretes with Rubber as Partial Replacement to Well-Graded Conventional Aggregates
Srinath Rajagopalan; P. Sreehari; B. Mahalingam; K. Mohammed Haneefa
2019
Effect of Crumb Rubber on Inorganic and High Compressible Clay
S. V. Sivapriya; N. Charumathy
2019
Hot Deformation Studies of Al-Cu-Mg Powder Metallurgy Alloy Composite
Sai Mahesh Yadav Kaku; Asit Kumar Khanra
2019
Evaluation of Vacuum Arc Melted-Powder Metallurgy Al-ZrB_2 Composite
Sai Mahesh Yadav Kaku
2019
Interlaminar Fracture Behaviour of Hybrid Laminates Stacked with Carbon/Kevlar Fibre as Outer Layers and Glass Fibre as Core
A. Arockia Julias; Vela Murali
2019
Microstructural Analysis and Simulation Studies of Semi-solid Extruded Al-Cu-Mg Powder Metallurgy Alloys
Katti Bharath; Asit Kumar Khanra; M. J. Davidson
2019
Mechanical and Tribological Properties of A356/Al_2O_3/MoS_2 Hybrid Composites Synthesized Through Combined Stir and Squeeze Casting
K. Sekar; M. Manohar; K. Jayakumar
2019
Synthesis and Characterization of TiB_2-SiC Ceramic Composite Produced Through Spark Plasma Sintering
P. G. HariKrishnan; K. Jayakumar
2019
Finite Element Analysis of High-Speed Machining of CFRP Material
K. Gobivel; K. S. Vijay Sekar; G. Prabhakaran
2019
Characterization of Mechanical and Thermal Properties in Soda-Lime Glass Particulate Reinforced LM6 Alloy Composites
M. R. Shivakumar; N. V. R. Naidu
2019
Tribo Performance of Brake Friction Composite with Stainless Steel Fiber
K. Sathickbasha; A. S. Selvakumar; M. A. Sai Balaji; B. Surya Rajan; Javeed Ahamed
2019
Influence of Stacking Sequence on Free Vibration Characteristics of Epoxy-Based Flax/Sisal Composite Beams
R. Murugan; N. Nithyanandan; V. Sathya
2019
Influence of Cryogenic Treatment on As-Cast AZ91+1.5 wt%WC Mg-MMNC Wear Performance
P. Karuppusamy; K. Lingadurai; V. Sivananth
2019
Dynamic Mechanical Analysis of Sub-micron Size Flyash Particles Filled Polyester Resin Composites
P. Nantha Kumar; A. Rajadurai; T. Muthuramalingam
2019
1
2
3
国家科技图书文献中心
全球文献资源网
京ICP备05055788号-26
机械工业信息研究院 2018-2024