先进制造业知识服务平台
国家科技图书文献中心机械分馆　　工信部产业技术基础公共服务平台　　国家中小企业公共服务示范平台

期刊


ISSN0032-5899
刊名Powder Metallurgy
参考译名粉末冶金学
收藏年代1998～2013



全部

1998 1999 2000 2001 2002 2003
2004 2005 2006 2007 2008 2009
2010 2011 2012 2013

2009, vol.52, no.1 2009, vol.52, no.2 2009, vol.52, no.3 2009, vol.52, no.4

题名作者出版年年卷期
Low viscosity feedstocks for powder injection mouldingF. Lapointe; S. Turenne; B. Julien20092009, vol.52, no.4
Study on Fe-Ti-V-C composite produced by self-propagating high temperature synthesisS. J. Fu; H. Cheng; Y. L. Yan; J. Wang; Y. C. Ding20092009, vol.52, no.4
Employing PVD thin films on press dies used in production of diamond compositesW. Tillmann; E. Vogli; S. Momeni20092009, vol.52, no.4
Effect of starting powder grade on sintering and properties of PM titanium metal matrix compositesI. Montealegre-Melendez; E. Neubauer; H. Danninger20092009, vol.52, no.4
Effect of residual pressure on vacuum sintering of Ti-Ni alloysI. M. Robertson; G. B. Schaffer20092009, vol.52, no.4
Design of titanium alloy for efficient sintering to low porosityI. M. Robertson; G. B. Schaffer20092009, vol.52, no.4
Effects of cold and hot densification on the mechanical properties of a 7XXX series powder metallurgy alloyI. A. MacAskill; A. D. P. LaDepha; J. H. Milligan; J. J. Fulton; D. P. Bishop20092009, vol.52, no.4
Tensile and fatigue behaviour of sinter hardened Fe-1.5Mo-2Cu-0.6C steelsG. Straffelini; V. Fontanari; A. Hafez; M. Benedetti20092009, vol.52, no.4
Optimising grey iron powder compactsW. Khraisat; H. Borgstrom; L. Nyborg; W. Abu al Jadayil20092009, vol.52, no.4
Simulated effects of martensite start temperature, thermal conductivity and pore content on end quench cooling rateF. J. Semel; D. A. Lados20092009, vol.52, no.4
123456



国家科技图书文献中心  全球文献资源网  京ICP备05055788号-26  机械工业信息研究院 2018-2024