先进制造业知识服务平台
国家科技图书文献中心机械分馆　　工信部产业技术基础公共服务平台　　国家中小企业公共服务示范平台

期刊


ISSN0309-3247
刊名The Journal of Strain Analysis for Engineering Design
参考译名工程设计应变分析杂志
收藏年代1995～2002



全部

1995 1996 1997 1998 1999 2000
2001 2002

2000, vol.35, no.1 2000, vol.35, no.2 2000, vol.35, no.3 2000, vol.35, no.4 2000, vol.35, no.5

题名作者出版年年卷期
A shrink-fit peg in a hole subjected to bending: unloading, reloading and frictional shakedownG. Urriolagoitia-Sosa; D. A. Hills20002000, vol.35, no.5
An inductive procedure for determining the stresses in multi-material components under steady state creepT. H. Hyde; W. Sun; A. Tang; P. J. Budden20002000, vol.35, no.5
Application of isotropic points extracted using computerize photoelastic experiment to design structural membersE. Umezaki; A. Shimamoto20002000, vol.35, no.5
Brief note: some observations of the parametric relationships in Hertzian fretting fatigue testsD. A. Hills; G. Urriolagoitia-Sosa20002000, vol.35, no.5
Deformations and stresses in pin-loaded tubes under axial tensionI. Ahmad; P. Stanley20002000, vol.35, no.5
Effects of geometry on the deformation of asphaltic plug joints subjected to surface tractionsZ. Q. Qian; A. R. Akisanya; M. S. Imababi20002000, vol.35, no.5
Frictional contact analysis of coated axisymmetric bodies using the boundary element methodL. A.de Lacera; L. C. Wrobel20002000, vol.35, no.5
Life assessment of weld repairs in 1/2Cr1/2Mo1/4V main steam pipes using the finite element methodT. H. Hyde; W. Sun; A. A. Becker20002000, vol.35, no.5
Numerical and experimental uniaxial loading on in-plane auxetic honeycombsF. Scarpa; P. Panayiotou; G. Tomlinson20002000, vol.35, no.5
Predicting rupture and low strain times for a 2.25Cr-1Mo steel using a six-θ projection techniqueM. Evans20002000, vol.35, no.5
12



国家科技图书文献中心  全球文献资源网  京ICP备05055788号-26  机械工业信息研究院 2018-2024