先进制造业知识服务平台
国家科技图书文献中心机械分馆　　工信部产业技术基础公共服务平台　　国家中小企业公共服务示范平台

期刊


ISSN0944-6524
刊名Production Engineering
参考译名生产工程
收藏年代2008～2023



全部

2008 2009 2010 2011 2012 2013
2014 2015 2016 2017 2018 2019
2020 2021 2022 2023

2015, vol.9, no.1 2015, vol.9, no.2 2015, vol.9, no.3 2015, vol.9, no.4 2015, vol.9, no.5/6

题名作者出版年年卷期
Modelling, simulation and compensation of thermal effects for complex machining processes: The priority programme 1480 "CutSim"Dirk Biermann; Ivan Iovkov20152015, vol.9, no.4
Evaluation of different approaches for modeling phase transformations in machining simulationVolker Schulze; Eckart Uhlmann; Rolf Mahnken; Andreas Menzel; Dirk Biermann; Andreas Zabel; Patrick Bollig; Ivan M. Ivanov; Chun Cheng; Raphael Holtermann; Thorsten Bartel20152015, vol.9, no.4
Modelling and simulation of Internal Traverse Grinding: bridging meso- and macro-scale simulationsRaphael Holtermann; Andreas Menzel; Sebastian Schumann; Dirk Biermann; Tobias Siebrecht; Petra Kersting20152015, vol.9, no.4
Determination of the heat flux to the workpiece during dry turning by inverse methodsM. Deppermann; R. Kneer20152015, vol.9, no.4
Identification of thermal effects on the diameter deviation of inhomogeneous aluminum metal matrix composite workpieces when dry turningStefan Schindler; Marco Zimmermann; Jan C. Aurich; Paul Steinmann20152015, vol.9, no.4
Temperature and wear analysis in milling of aerospace grade aluminum alloy Al-7050Bircan Bugdayci; Ismail Lazoglu20152015, vol.9, no.4
Heat input modeling and calibration in dry NC-milling processesM. Schweinoch; R. Joliet; P. Kersting; A. Zabel20152015, vol.9, no.4
Optimization of a drilling sequence under MQL to minimize the thermal distortion of a complex aluminum partPierre Faverjon; Joel Rech; Frederic Valiorgue; Marc Orset20152015, vol.9, no.4
Heat-flow determination through inverse identification in drilling of aluminium workpieces with MQLUnai Segurajauregui; Pedro Jose Arrazola20152015, vol.9, no.4
Investigations on the formation of straightness deviation in MQL deep-hole drilling of thin-walled aluminium components: Experimental and simulation-based analysis of thermomechanical effects in deep-hole drilling using single-lip drills and twist drillsDirk Biermann; Ivan Iovkov20152015, vol.9, no.4
12



国家科技图书文献中心  全球文献资源网  京ICP备05055788号-26  机械工业信息研究院 2018-2024